Quadrox QGuard User Manual - Manual (Page 91)

QGuard User Manual 91
Version 4.9 Series
3.3.4.2 Advanced Storage Settings
Click the Advanced Storage Settings button in the Storage Manager screen to open the
Advanced Storage Settings Wizard. This menu allows for the configuration of the movie
lifetime parameters for all types of movies.
The following Advanced Storage Settings Wizards tabs are described:
 Movie Lifetime
 Alarms
 POS
3.3.4.2.1 Movie Lifetime
This tab allows you to configure the Maximum lifetime of a movie. It is a value set in hours,
days or months which determines the amount of time the recorded movies will be kept on the
hard disk.
Movie Lifetime Screen
In order to set a movies lifetime limitation, follow the steps below:
1. Check Limit the maximum lifetime of a movie checkbox.
2. Select the unit of time from the drop-down list (default unit is day(s)).
3. Enter an integer number indicating the period of time the movies will be kept
(minimal value is 1).
Click Next to enter the next Advanced Storage Settings Wizard Screen.
3.3.4.2.2 Alarms
This tab allows you to configure two parameters:
This tab will not be available unless the Alarm Component is installed.
 Minimum lifetime of alarm recordings – integer value set in hours and determines
the amount of time the alarm movies will be kept on the hard disk. Check the
checkbox if you want to activate this parameter.
 Minimum number of alarms to keep – integer value indicating the minimum
number of alarms to keep. Check the checkbox if you want to activate this parameter.