Quadrox QGuard User Manual - Manual (Page 101)

QGuard User Manual 101
Version 4.9 Series
3.3.9 Network Video Recorders
This menu allows you to define multiple QGuard units to enable simplified switching
between units by using one centralized installed IIS server (Web Application User Interface).
See chapter 2.1 QGuard IIS Split for more information about this option.
In order to add and configure your network video recorders, click the Edit or Add NVR
link/button in the Network Video Recorders screen. The Network Video Record Wizard
consists of one tab with easy to follow instructions.
Network Video Recorders Screen
3.3.9.1 Network Video Recorder Wizard
The Network Video Recorder Wizard only has the Name tab on which you can configure the
following parameters:
 Name – Friendly name for the unit.
 LAN IP Address or DNS Name – IP address or DNS name of the unit.
 LAN TCP Port – Control port of the unit.
By default the control port is 1518.
 WAN IP Address or DNS Name – If you want to access your unit over the Internet,
you need to specify the external/public IP address or DNS name of the unit.
 WAN TCP Port – Control port of the unit on the WAN side of the network.
By default the control port is 1518.
 Make default NVR – This unit will be the default unit which is connected to when
accessing the centralized Web Application User Interface.
Recommended for installations where only one network video recorder and IIS are
installed.