Quadrox QGuard User Manual - Manual (Page 118)

QGuard User Manual 118
Version 4.9 Series
Single View Screen
4.2.1.1 Sequences
To select a Single View Sequence, select the sequence from the drop-down list and click the
Single View button. If the preferred sequence is already selected in the drop-down list, you
can click on at the left of the drop-down list.
Creating sequences can be done in the Video Manager application.
Click on any camera button to stop automatic switching and revert to viewing
cameras manually.
When manual switching is completed, automatic switching retakes after 30 seconds.
4.2.1.2 Mosaics
To select a Mosaic, select the mosaic from the drop-down list and click the Mosaic View
button. If the preferred mosaic is already selected in the drop-down list, you can click on
at the left side of the drop-down list.
Creating mosaics can be done in the Video Manager application.
Note that after selecting a mosaic view, the user will automatically be switched to the
Mosaic View mode. See 4.2.2 Mosaic View for more information.