Quadrox QGuard User Manual - Manual (Page 28)

QGuard User Manual 28
Version 4.9 Series
3.3 Settings
Settings Control Panel
The System Settings enable the user to change the QGuard behavior and adapt it to the
specific requirements. This chapter covers the following sections:
 Cameras
 Alarms
 POS
 Storage Manager
 Single View
 Mosaics
 Network Settings
 Certificate Management
 Time Synchronization
Use System Settings with extreme caution, some of them can seriously affect the
QGuard performance and even stop proper functioning of the system.
Some of the System Settings require the QGuard to be rebooted for the settings to
take effect. You will be informed to reboot the QGuard server by a red message on
the screen. To restart the QGuard, click the Restart button which will turn red or
click the Restart now link that appears at the end of the message. While restarting the
server, you will get a message that the server is restarting. Once restarted, a successful
reboot message will be displayed.