Quadrox QGuard User Manual - Manual (Page 44)

QGuard User Manual 44
Version 4.9 Series
3.3.1.3 Network Video Server Wizard
In this manual, we will refer to a Network Video Server as NVS.
To enter the Network Video Server Wizard, click the Edit device or Add Network Video
Server link/button in the Cameras screen. The Network Video Server Wizard consists of
three tabs with easy to follow instructions.
The following Network Video Server Wizard tabs are described in this chapter:
 Name & Type
 Connection
 Video Settings
If you need to change camera settings from cameras that are connected to the NVS, click the
Edit link of the camera in the cameras screen which will display the Network Video Server
Cameras Wizard. The Network Video Server Camera Wizard consists of six tabs with easy
to follow instructions.
The following Network Video Server Camera Wizard tabs are described in this chapter:
 Name
 Recordings
 Activity  PTZ
 Virtual Patrol
 Users
You need to install the Quadrox Codecs Pack for proper NVS usage.
The NVS Wizard displays settings which are common for all cameras connected to
the NVS. In the NVS Camera Wizard you are able to adjust the specific settings for
an individual camera connected to the NVS.
By default, some of the settings are already selected. It is recommended that you keep
these settings to ensure the best performance.
Cameras Screen