Quadrox QGuard User Manual - Manual (Page 93)

QGuard User Manual 93
Version 4.9 Series
3.3.4.3 Detailed Storage Information
This menu gives you the detailed information about the space used by recordings from each
camera on each volume.
The parameters shown here are measured in Megabytes.
The following info is available on a per camera basis in the Detailed Used Storage
Information table:
 Used space and % of total – amount of disk space currently used by the recorded
video footage from the particular camera in MB as well as the percentage used of the
total available space.
 Oldest movie (hours) – age of oldest recorded video footage that belongs to this
particular camera.
 Days columns – total size of recorded video footage from the particular camera for a
particular day.
 Total per volume – storage space consumed by all cameras assigned to a particular
volume for a particular day.
 Total – storage space consumed by all cameras for a particular day.
Detailed Used Storage Information Screen
12.5% of the total space amount is reserved by the Operating System for the Master
File Table (MFT). If free space becomes less then 12.5%, MFT begins to fragment.
This process makes the Operating System slow. Therefore the maximum disk space
that might be occupied by recordings is 87.5% of total disk space.