Quadrox QGuard User Manual - Manual (Page 14)

QGuard User Manual 14
Version 4.9 Series
Compared to Internet Explorer access, accessing QGuard via the Local Interface has
limited user functionality. The Local Interface access does not consume much CPU
and memory. Accessing QGuard via Local Interface slightly increases image quality.
To access QGuard locally, please follow the steps below:
1. Connect a monitor, a keyboard and a mouse directly to the QGuard.
2. By default, a standard Windows Login window will appear on the screen. Login with
administrative credentials.
Please contact your installer for the correct details.
3. Depending on how you accessed the QGuard last time, you will see either a QGuard
Local Interface directly on the screen or a QGuard Local Interface icon on the system
tray in the right bottom corner.
4. Double click the Local Interface icon to restore the Local Interface.
It’s possible to configure the QGuard not to show the Windows logon screen after a
restart and go directly to the Local Interface. To achieve this double-click the icon
“Operator Mode” on the QGuard desktop.
QGuard Local Interface Single View Screen