Quadrox QGuard User Manual - Manual (Page 66)

QGuard User Manual 66
Version 4.9 Series
Outputs (Alarm) Screen
Click Next to enter the next Alarm Configuration Wizard Screen.
3.3.2.5.6 Notification
This tab allows you to configure the sound notification for an incoming alarm. At the same
time, it’s possible to automatically switch to live view for an assigned camera.
To use the sound notification, speakers should be connected to QGuard server.
To get the sound notification signal when an alarm is triggered, select the Play sound
checkbox.
To configure switching to Live View on a specific camera, follow the steps below:
1. Select Switch to Live view from camera checkbox.
2. Choose the desired camera from the drop-down list.
Notification (Alarm) Screen
Click Next to enter the next Alarm Configuration Wizard Screen.