Quadrox QGuard User Manual - Manual (Page 36)

QGuard User Manual 36
Version 4.9 Series
The following parameters can be set for a network camera:
 Format – gives an opportunity to choose between commonly used Compression
technologies or indicates the compression technology that is used for a specific camera
type.
 Image resolution – a higher resolution gives a better quality image. A higher image
resolution will lead to a lower frame rate.
Live View (Network camera) Screen
Click Next to enter the next Camera Wizard screen.
3.3.1.2.4 Recordings
The available parameters for recordings are the same for analogue and network cameras:
 Record this camera – the camera will be recorded if the box is checked.
 Format – gives the option to choose between commonly used compressions
technologies or indicates the compression technology that is used for a specific camera
type.
 Image resolution – a higher resolution gives a better quality image. A higher image
resolution will lead to a lower frame rate.
 Frame rate – possible frame rates depend on the chosen image resolution.
 Volume – the storage volume on which the camera is recorded. You can change the
volume for each camera (see 3.3.4 Storage Manager)