Quadrox QGuard User Manual - Manual (Page 77)

QGuard User Manual 77
Version 4.9 Series
3.3.3.3.1 Device Name
In this tab, you can adjust the POS Device name. It’s a part of the POS Device
Configuration Wizard.
Name (TP.Net) Screen
Click Next to enter the next POS Device Configuration Wizard Screen.
3.3.3.3.2 Device Protocol
In this tab, the protocol has to be selected. It’s a part of the POS Device Configuration
Wizard.
Select TP.NET in the drop-down list.
Protocol (TP.Net) Screen
Click Finish button. You will end up in the Connection tab of the POS Device Configuration
Wizard.
Depending on the drivers you installed together with the Alarm Component, it’s
possible some options are not present in the drop-down list.
If you entered the POS Device Configuration Wizard by clicking the Edit Device link
in the POS Screen, you can no longer change the protocol.