Quadrox QGuard User Manual - Manual (Page 76)

QGuard User Manual 76
Version 4.9 Series
Recordings (Generic POS) Screen
To delete a camera, click Delete.
Click Finish button.
3.3.3.3 TP.Net
The TP.Net device has to be configured at both sides. This means at the TP.Net software side
and at the QGuard side. We only discuss the QGuard side. For the TP.Net software side,
consult the TP.Net documentation.
In order to add and configure your POS device, click the Edit device or Add POS Device
link/button in the POS screen. The POS Device Configuration Wizard consists of four tabs
with easy to follow instructions.
In order to configure the sources, click the Edit link of the source in the POS screen which
will lead you to the POS configuration Wizard. The POS Configuration Wizard consists of
two tabs with easy to follow instructions.
The POS functionality is a part of the QGuard Alarm Component. You need the
Alarm Component installed before you can use the POS functionality.
You need to select the TP.Net driver in the custom menu when installing the Alarm
Component. By default only the Serial Port POS and Generic POS driver is installed
when installing the Alarm Component.