Quadrox QGuard User Manual - Manual (Page 12)

QGuard User Manual 12
Version 4.9 Series
If you want to connect through the centralized Web Server, you have to use the extend logon
screen by clicking Options. There you select or type the video server IP or DNS name:
For more information about the configuration of this setup, see chapter 3.3.7.
Network Video Recorders where you can define all servers which are reachable
through a centralized Web Server.
You can choose which server you want to use as the default server to connect to. For
more information, see chapter 3.3.7. Network Video Recorders.
Extended Logon Screen
2.2 Access QGuard via Internet Explorer
QGuard automatically starts recording the moment it is turned on and booted. The
booting process takes about two minutes.
The QGuard can be accessed via Internet Explorer. This Internet Explorer browser
can reside on three places:
1. A capable client LAN PC: This is a PC in the same network as the QGuard
2. A capable client WAN PC: This is a PC on the wide area network. Your
router/firewall has to be configured properly in order to connect to QGuard.
3. The QGuard: On the desktop of the QGuard, you can click the video browser
icon which will open the Internet Explorer browser on the QGuard itself
automatically redirecting you to the QGuard server.
Only ‘ActiveX’ supporting Internet Browsers are designed to be used with the
QGuard. Internet browsers like Netscape, Opera and other browsers that do not
support ‘ActiveX’, are not suitable for use with QGuard.
To access the QGuard server via Internet Explorer, follow the steps below: