Quadrox QGuard User Manual - Manual (Page 119)

QGuard User Manual 119
Version 4.9 Series
4.2.1.3 Low/High Bandwidth Mode
Low/High bandwidth mode allows you to decide if you want to have streaming video that
consumes a reduced bandwidth. You can choose from:
 High Bandwidth Mode (Default) – High Bandwidth mode is used preferably on local
computers (when the QGuard client is located on the same machine as the QGuard
server), in local area networks or with high-speed Internet connections. Use the High
( ) button to enable high bandwidth mode.
 Low Bandwidth Mode – Low bandwidth mode is mostly used in medium- or slow-
speed LAN or Internet connections. When Low Bandwidth mode is enabled, the frame
rate and the resolution of the images are reduced. It produces a reduced bandwidth
usage while streaming video. Use the Low ( ) button to enable low bandwidth
mode.
4.2.1.4 Snapshots
This QGuard feature gives you the ability to make snapshots. To create a snapshot, follow the
steps below:
1. Choose the frame you want to save and click the button with the camera symbol
( ).
2. Choose the desired location for storing images and click the Save button.
Snapshots are saved in .JPEG format.
4.2.1.5 PTZ
QGuard supports all standard PTZ functions. These functions are listed below:
Functions Parameters
Move left, right, up, down
Rotate constant left, constant right
Zoom in, out
Preset recall/Set select, set
PTZ speed higher, lower
 Move – Using these buttons you can move the camera in any direction you want. To
move the camera, click on the button with the arrow pointing in the direction you want
to move the camera to.
 Rotate – Using these buttons allows you to rotate a dome camera left or right without
interruption.