ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 444)

426 Eos Titanium, Eos, and Gio Operations Manual
User Guidelines
Fader Wing Interaction With Eos / Gio Consoles
Eos / Gio will automatically recognize the fader wings and their configuration (2 x 10, 2 x 20) once
they are plugged into the console. The system will configure the faders according to the
configuration in fader wing configuration screen, for more information see
{Fader Wing Config},
page 133 . The system will automatically configure the leftmost fader wing to start with fader page
one. Any subsequent rows or wings will then be configured in succession to represent the
appropriate faders.
On fader wings, Latest-Takes-Precedence (LTP): any levels set on the console will override
settings on the wings. Your next move on the fader wing will override the console.
When 2x fader wings are attached to each other, the faders will populate continuously across the
attached array. The top row of all wings will be successive from one wing to the next. The bottom
row will start where the entire top row left off and then will also be successive from one wing to the
next.
Therefore, when fader wings are attached to each other:
LCD
The display at the center of the fader wing shows information about the faders.
For submasters the sub number, label, and current value (0-100%) of the fader are shown. When
the page is changed, the current value will display the necessary percentage the fader must be set
at to match the required level of the submaster.
For playbacks the cue list number will be shown preceded by an “L” {for example “L3” = cue list 3).
Beneath this the current pending cue is displayed in an oval shape.
For Grandmasters, a “GM” is displayed and the current output percentage is shown (100% -
blackout).
Fader Wing Paging
The fader wing is paged using the [Fader Page] button on the Eos console. Fader pages are
delineated in 10 fader increments. If you advance to the next fader page, your entire fader wing
array will advance by a total of 10 faders.
2x10 2x20 2x10
Top Row Faders
Bottom Row Faders
1 - 10
41 - 50
31 - 40
71 - 80
11 - 30
51 - 70
Top Row Faders
Bottom Row Faders
1 - 10
11 - 20
21 - 30
31 - 40
Fader Wings Attached
Fader Wings Separate