Irfr, Arfr, Phone remote on eos ti and gio – ETC Eos Titanium, Eos, and Gio v2.0.0 User Manual
Page 440: Phone remote functions, Phone remote connector
422
Eos Titanium, Eos, and Gio Operations Manual
iRFR
The iRFR is a software application that runs on an Apple iPhone® or iPod Touch. The application
can be downloaded from the Apple Application Store, search for iRFR. The iRFR offers the same
functionality of the RFR. A closed wireless network is needed.
For additional information on the iRFR, including setup, please visit
aRFR
The aRFR is an application that runs on Android devices. The application can be downloaded from
the Android Marketplace, search for aRFR. The aRFR offers the same functionality of the RFR. A
closed wireless network is needed.
For additional information on the aRFR, including setup, plea
Phone Remote on Eos Ti and Gio
The phone remote allows for remote control of Eos Ti and Gio by using a wireless phone. The base
station for the phone connects directly to the phone remote jack on the rear of your console. See
for Eos Ti and
for Gio. The numeric
keypad of the phone is used to control channels and levels.
Phone Remote Functions
The numeric keypad of the phone is mapped as following:
To use the commands in gray, first hit the [*] button followed by the number or symbol above the
gray command. For example, to place a [+] on the command line, press [*] [1].
Pressing [*] [*] will clear the command. Commands entered from the phone remote will appear on
the command line for the console.
Phone Remote Connector
The pin outs for the phone remote RJ11 connector are:
• Pin 4 - Data +
• Pin 5 - Data -
1
+
Thru
-
4
Last
Macro
@
5
6
7
Next
Address
Full
8
9
*/Shift
Clear CL
Chan
Check
Sneak
0
#/Enter
2
3