N o t e – ETC Eos Titanium, Eos, and Gio v2.0.0 User Manual

Page 443

Universal Fader Wings

425

then press down gently on the wing on the right until it is fully seated. This should be
a smooth connection but may require a little force.

Step 6:

Repeat above procedure to attach another wing to the right end of the pair, if desired.

Step 7:

Re-insert screws to secure wings together and secure the bumpers to the sides of the
wings.

Connect Universal Fader Wing(s) to Console with USB Cable

Step 1:

With the console power off, attach the USB A to B cable (provided) between the

console and one wing as shown above. If multiple wings are joined, only one power

and one USB connection is required for all joined wings.

Step 2:

Using the power supply adapter kit, connect the fader wing to a power source.

Step 3:

It is recommended that you run the power and USB cables through the strain relief
included on the back of the wings.

Step 4:

Turn the console on.

N o t e :

When connecting fader wings to Eos Ti or Gio, they must be plugged into a USB

1.1 hub and then connected to an USB port on Eos Ti / Gio.

connect to USB

on the console

connect PS364-F

power supply

cable

(included)

connect

USB cable

(included)