ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 385)

A
Eos Configuration Utility 367
Keyboard
Allows you to select the language for the alphanumeric keyboard within Eos. A wide variety of
keyboards are supported. The keyboard can also be changed in the application when the virtual
keyboard is open.
Open in Shell
When this is checked, the desk will boot into the Configuration Utility every time instead of booting
directly into the main application.
Automatically Update Software
When this is checked, the desk will receive software updates from the primary if used in a multi-
console system.
Show Archive Path
This is the default location to save show files. The full path must be typed in and specified in a legal
Windows format. The default location is a folder on the D: drive.
If you decide to change this setting, it is recommended that you keep this location on the D: drive.
Share Show Archive
Checking this box will enable you to share the show archive folder on the desk with another desk or
computer via Windows File Sharing (SMB).
Share Media Archive
Checking this box will enable you to share the media archive folder on the desk with another desk
via Windows File Sharing (SMB).
Latitude
Allows you to select the latitude the desk is using.
Longitude
Allows you to select the longitude the desk is using.
Calibrate Touchscreens (Eos Only)
This will launch a screen calibration utility to guide you through the process of re-calibrating the
touchscreens. This should be used if the pointer is consistently offset from where you are touching
the screens. You can choose to calibrate the left, right, and small on-board touchscreens.
Each screen is calibrated independently.
Click on the flag icon to change
the keyboard language.