CHAMPION EEUCCW8 - Manual (Page 16)

8
Installation
Installation
Joining the Sections
1. Apply a 1/2" bead of FOOD GRADE
sealant to the foam gaskets on each
section.
2. Move the next section close to the "C".
Adjust the feet of this section to align
the 20 bolt holes around the hood.
3. Slide the connecting hoses and
clamps on drain pipes and cross-flow
pipes. Do not tighten
at this time.
4. Level each section side to side and
front to back making sure the section
connecting bolt holes align.
5. Make sure the sections are adjusted
to the same height.