CHAMPION CG Installation Instructions - Manual

6
INSTALLATION
Unpacking
1. Remove all packing from inside and on top of the machine.
2. Remove all packing from glass operated switch and left and right pick-up plates. Check
that the left and right hand pick-up plates are positioned properly.
3. Check the position of the splash curtains.
4. Check that the conveyor is aligned with the drive sprockets and the lift bracket on the right
hand side is firmly engaged over track adjusters.
5. Remove the packing from within and above the detergent tank.
6. Ensure the standpipe is in position in the detergent tank. Ensure the short standpipe is in
position on the right hand side of the wash tank underneath the conveyor lift bracket.
NOTE:
The wash tank standpipe is located inside the wash return screen for shipping.
7. Ensure that the wash return screen in the detergent tank is in position.
8. Check that the lower drain screen is in position.
INSTALLATION
PICK-UP
PLATE
MAIN TANK
STANDPIPE
SHUT-OFF
CURTAIN
DETERGENT
TANK
8
6
7
Figure 1 — Unpacking Parts