CHAMPION EEUCCW8 - Manual (Page 12)

4
Installation
ATTENTION
Shipping pallets measure 48"/122cm
wide. Standard 36"/92cm doorways often
measure less than 35"/89cm in width.
Installation
Receiving (continued)
1. Check the shipment for damage
immediately upon receipt.
2. Upright conveyor dishwashers
ship in sections.
3. Each section is wrapped in a
protective covering and secured to
a wooden pallet. Labels note the
total number of sections shipped,
2 of 4, for example.
4. Fasteners, curtains, panels
and other pieces are packed in
cardboard boxes and secured
to the wash/rinse section of the
machine.
5. Inspect the route that the pallets
must travel to the permanent
location.
6. Measure all passageways and
doors before moving the sections
to ensure the route is clear.
7. Piping on the rear wall of the
dishwasher can be removed to
allow the dishwasher to pass
through narrow openings if
necessary.
8. Compare the location of the site
utilities with the Plumbing and
Electrical Connection Diagram,
(P&E).
9. Make sure the utilities match the
dishwasher requirements.
Each section is wrapped and the number of sections is marked
on a label attached to each section.