CHAMPION EEUCCW8 - Manual (Page 13)

5
Installation
CAUTION
Use extreme care when lifting
a section off its pallet to prevent
damage to the dishwasher.
Receiving
Installation
1. Check floor stability. Flooring
must support the weight of the
dishwasher without bowing
when weight is applied.
2. Tiled floors may fracture if loads
are dropped on or drug across
its surface.
3. Move the pallet sections near
their permanent locations.
Remove protective coverings,
shipping straps, brackets and
accessories.
4. Inspect the underside of each
section, (below the base) and
note the position of piping,
valves, and other components
that may be in the way.
5. Carefully lift each section off
the pallet. Screw the adjustable
bullet-feet in as far as possible,
then lower the section to the
finished floor.
6. The recommended spacing
between sections is 24"/61cm.