CHAMPION CG Operation Instructions - Manual

OPERATION
General
1. The wash tank is equipped
with a float assembly that
operates a single cam-
operated switch.
2. The water temperature is
controlled by a heater and
a thermostat. The
thermostat should be
between 140°F/60°C and
160°F/ 71°C.
To Fill the Wash Tank
Ensure that the standpipe (A) is in place. Put switch (B) up to the “ON-FILL” position. The
water will fill until the proper level is reached. The heating element will then turn on
automatically once the tank has filled.
Detergent is fed from the supply container into the detergent tank in controlled amounts by the
detergent pump. Use detergent at a strength of 0.35% or as recommended by your chemical
supplier.
To Flush the Wash Tank
The selector switch (B) may be pushed down to the “FLUSH” position to clean the detergent
tank during cleaning operations. The glasswasher will not wash dishes in the flush position. To
use the flush function: Remove the standpipe (A) and drain the tank. Push the selector switch
(B) down to the flush position. Water will enter the detergent tank as long as the switch is held
in the “FLUSH” position. When desired flushing is complete, release switch (B).
NOTE:
Use a commercial grade NON-CHLORINATED liquid detergent manufactured specifically
for glassware washing machines. Your chemical representative should test the solution to
ensure the proper strength to achieve the best cleaning results.
NOTE:
Many of the chemicals used in glass and dishwashers are harmful to the skin and eyes in
their concentrated form. Use extreme caution when handling containers to prevent
accidental exposure.
Operating Instructions
1. Open front door, flip toggle switch located on wash tank to the “ON-FILL” position. Wash
tank will automatically fill.
2. Ensure there is product in the detergent, sanitizer and rinse agent containers.
3. Load glasses on the conveyor. Start machine with round start/stop knob located on the
front load side of unit. Machine will now stop with shut-off rod and can be restarted with
the round stop/start knob or shut-off rod.
9
OPERATION
A
B
Figure 3 — Wash Tank