Apple Logic Express 9 - Manual (Page 820)

Stage 2: Define the Bounce Range
Define the bounce range. See Defining the Bounce Range .
Stage 3: Set the Bounce Parameters
Set the parameters in the Bounce window. See Defining Parameters in the Bounce Window .
Stage 4: Set the Bounce Filename and Folder
Enter a destination name and folder for the bounce files. See Setting the Bounce Filename
and Folder .
Stage 5: Perform the Bounce
Click the Bounce (or Bounce & Burn) button in the Bounce window.
Note: Mono bouncing is possible when the output channel strip is set to mono. In this
situation, a mono audio file is generated.
Routing Channel Strips to an Output
You can route a single channel strip or multiple channel strips to an output channel strip.
To route a channel strip to an output channel strip
µ
Click and hold the Output slot of the channel strip, then choose the appropriate output
from the pop-up menu.
To route multiple channel strips to an output channel strip
1 Drag to select (or Shift-select) the channel strips.
2 Click and hold the Output slot of one of the selected channel strips, then choose the
appropriate output from the pop-up menu.
All selected channel strips are routed to the chosen output channel strip.
820 Chapter 29 Bouncing Your Project