Apple Macintosh PhotoFlash - Manual (Page 75)

IMPORTANT If Preserve Size isn’t selected and you increase the image’s
resolution, it will use more disk space when you save it. Make sure you have
enough space available.
5 Click OK to close the Resize dialog box and initiate the resolution change.
PhotoFlash changes the image’s resolution, ignoring any selection the image
may contain.
If you’re resizing multiple images whose thumbnails are selected in a catalog,
PhotoFlash opens the images (if they’re not already open) and changes the
resolution of each one.
Straightening an image
If an image wasn’t exactly straight straight on the scanner when it was
scanned, or if the camera used to take a picture wasn’t level, or if for any
reason you want to straighten an entire image within its window, you can use
the Straighten command to do so. Follow these steps:
1 Make sure the window for the image you want to straighten is the frontmost window.
2 Choose Straighten from the Image menu.
A cross with a circle in its center appears over the image. If you’ve previously
selected any part of the image, the selection disappears. (It will reappear in
the corresponding part of the straightened image.).
If you change your mind and decide you don’t want to straighten the image
after all, choose Cancel Straighten from the Image window, press the Escape
(Esc) key, or press
x-period.
65 Manipulating Images