Brocade Communications Systems Layer 3 Routing Configuration ICX 6650 User Manual
Page 97

Brocade ICX 6650 Layer 3 Routing Configuration Guide
79
53-1002603-01
Configuring IP parameters – Layer 3 Switches
lease: 0 0 30
netbios-name-server: 192.168.1.101
network: 192.168.1.0 255.255.255.0
next-bootstrap-server: 192.168.1.102
tftp-server: 192.168.1.103
Syntax: show ip dhcp-server address-pool[s] [name]
•
address-pool[s] - If you enter address-pools, the display will show all address pools
•
name - Displays information about a specific address pool
describes this output.
Displaying lease-binding information in flash memory
The show ip dhcp-server flash command displays the lease-binding database that is stored in flash
memory.
Brocade# show ip dhcp-server flash
The following information is displayed.
Brocade# show ip dhcp-server flash
Address Pool Binding:
IP Address Client-ID/ Lease expiration Type
Hardware address
192.168.1.2 0000.005d.a440 0d:0h:18m:59s Automatic
192.168.1.3 0000.00e1.26c0 0d:0h:19m:8s Automatic
Syntax: show ip dhcp-server flash
TABLE 11
CLI display of show ip dhcp-server address pools command
Field
Description
Pool name
The name of the address pool
Time elapsed since last save
The time that has elapsed since the last save.
Total number of active leases
The number of leases that are currently active.
Address pool state
The state of the address pool (active or inactive).
IP Address exclusions
IP addresses that are not included in the address pool
Pool configured options
bootfile
The name of the bootfile
dhcp-server-router
The address of the DHCP server router
dns-server
The address of the dns server
domain-name
The name of the domain
lease
The identifier for the lease
netbios-name server
The address of the netbios name server
network
The address of the network
next-bootstrap-server
The address of the next-bootstrap server
tftp-server
The address of the TFTP server