Brocade Communications Systems Layer 3 Routing Configuration ICX 6650 - Manual (Page 279)

Brocade ICX 6650 Layer 3 Routing Configuration Guide 261
53-1002603-01
Displaying OSPF V3 Information
Displaying OSPF V3 interface information
You can display a summary of information for all OSPF V3 interfaces or detailed information about
a specified OSPF V3 interface.
To display a summary of OSPF V3 interfaces, enter the show ipv6 ospf interface command at any
CLI level.
Syntax: show ipv6 ospf interface [ethernet port | loopback number | tunnel number | ve number]
The ethernet | loopback | tunnel | ve parameter specifies the interface for which to display
information. If you specify an Ethernet interface, also specify the port number associated with the
interface. If you specify a loopback, tunnel, or VE interface, also specify the number associated
with the interface.
Prefix Options An 8-bit field of capabilities that serve as input to various routing calculations:
•
NU – The prefix is excluded from IPv6 unicast calculations.
•
LA – The prefix is an IPv6 interface address of the advertising router.
•
MC – The prefix is included in IPv6 multicast routing calculations.
Prefix The IPv6 prefix included in the LSA.
Intra-Area Prefix LSAs (Type 9) (Iap) fields
Number of Prefix The number of prefixes included in the LSA.
Referenced LS Type,
Referenced LS ID Identifies the router-LSA or network-LSA with which the IPv6 address prefixes are
associated.
Referenced
Advertising Router The address of the neighboring router that advertised the route.
Prefix Options An 8-bit field describing various capabilities associated with the prefix.
Metric The cost of using the advertised prefix.
Prefix The IPv6 prefix included in the LSA.
Number of Prefix The number of prefixes included in the LSA.
TABLE 45 OSPF V3 detailed database information fields (Continued)
Field Description
Brocade#show ipv6 ospf interface
Interface OSPF Status State Area
ethe 1/1/1 up
ethe 1/1/2 enabled up DR 0
ethe 1/1/3 disabled down
loopback 2 enabled up Loopback 0
tunnel 1 disabled down
tunnel 2 enabled up P2P 0
tunnel 6 up