Displaying the data in an lsa, Displaying ospf virtual neighbor information, Displaying ospf virtual link information – Brocade Communications Systems Layer 3 Routing Configuration ICX 6650 User Manual
Page 242

224
Brocade ICX 6650 Layer 3 Routing Configuration Guide
53-1002603-01
Displaying OSPF information
Displaying the data in an LSA
You can use the CLI to display the data the Layer 3 Switch received in a specific External LSA
packet or other type of LSA packet. For example, to display the LSA data in entry 3 in the External
LSA table, enter the following command.
Syntax: show ip ospf database external-link-state [advertise num] | [link-state-id ip-addr] |
[router-id ip-addr] | [sequence-number num(Hex)] | [status num]
To determine an external LSA or other type of LSA index number, enter one of the following
commands to display the appropriate LSA table:
•
show ip ospf database link-state advertise num – This command displays the data in the
packet for the specified LSA.
•
show ip ospf database external-link-state advertise num – This command displays the data in
the packet for the specified external LSA.
For example, to determine an external LSA index number, enter the show ip ospf external-link-state
command.
Displaying OSPF virtual neighbor information
To display OSPF virtual neighbor information, enter the show ip ospf virtual-neighbor command at
any CLI level.
Brocade#show ip ospf virtual-neighbor
Syntax: show ip ospf virtual-neighbor [num]
The num parameter displays the table beginning at the specified entry number.
Displaying OSPF virtual link information
To display OSPF virtual link information, enter the show ip ospf virtual-link command at any CLI
level.
Brocade#show ip ospf database external-link-state advertise 3
Index Aging LS ID Router Netmask Metric Flag
3 619 10.27.250.0 192.168.0.3 fffffe00 000003e8 b500 0.0.0.0
LSA Header: age: 619, options: 0x02, seq-nbr: 0x80000003, length: 36
NetworkMask: 255.255.254.0
TOS 0: metric_type: 1, metric: 1000
forwarding_address: 0.0.0.0
external_route_tag: 0
Brocade#show ip ospf external-link-state
Index Aging LS ID Router Netmask Metric Flag
1 1809 10.18.81.0 192.168.103.6 ffffff00 000003e8 b500 0.0.0.0
2 8 10.27.250.0 192.168.103.6 fffffe00 000003e8 b500 0.0.0.0
3 8 10.215.0.0 192.168.103.6 ffff0000 000003e8 b500 0.0.0.0
4 18 10.33.192.0 192.168.102.6 fffffc00 000003e8 b500 0.0.0.0
5 959 10.9.168.0 192.168.102.6 ffffff00 00002710 b500 0.0.0.0
6 1807 10.3.226.0 192.168.0.3 ffffff00 000003e8 b500 0.0.0.0
7 1809 10.6.197.0 192.168.3.3 ffffff00 000003e8 b500 0.0.0.0