Brocade Communications Systems Layer 3 Routing Configuration ICX 6650 - Manual (Page 474)

456 Brocade ICX 6650 Layer 3 Routing Configuration Guide
53-1002603-01
Displaying VRRP and VRRP-E information
Clearing VRRP or VRRP-E statistics
To clear VRRP or VRRP-E statistics, enter the clear ip vrrp-stat command at the Privileged EXEC
level or any configuration level of the CLI.
Brocade#clear ip vrrp-stat
Syntax: clear ip vrrp-stat
To clear IPv6 VRRP v3 or IPv6 VRRP-E v3 statistics, enter the following command at the Privileged
EXEC level or any configuration level of the CLI.
Brocade#clear ipv6 vrrp-stat
Syntax: clear ipv6 vrrp-stat
Displaying CPU utilization statistics
To display CPU utilization statistics for the previous one-second, one-minute, five-minute, and
fifteen-minute intervals, enter the following command at any level of the CLI. In the following output
example, IPv6 protocols are also displayed.
If the software has been running less than 15 minutes (the maximum interval for utilization
statistics), the command indicates how long the software has been running, as shown in the
following example.
Brocade#show process cpu
Process Name 5Sec(%) 1Min(%) 5Min(%) 15Min(%) Runtime(ms)
ARP 0.02 0.02 0.02 0.02 15532
BGP 0.00 0.00 0.00 0.00 0
DOT1X 0.00 0.00 0.00 0.00 0
GVRP 0.00 0.00 0.00 0.00 0
ICMP 0.01 0.01 0.01 0.01 8608
IP 0.09 0.12 0.11 0.08 72959
OSPF 0.05 0.07 0.07 0.06 85015
RIP 0.00 0.00 0.00 0.00 98
STP 0.68 0.86 0.78 0.57 568586
VRRP 0.42 0.54 0.50 0.37 357133
Process Name 5Sec(%) 1Min(%) 5Min(%) 15Min(%) Runtime(ms)
IPv6 1.23 1.49 0.99 1.40 917973
ICMP6 0.04 0.05 0.06 0.04 38508
ND6 0.00 0.01 0.01 0.01 6691
RIPng 0.00 0.00 0.00 0.00 45
OSPFv3 0.00 0.00 0.00 0.00 1515
IPV6_RX 0.16 0.21 0.21 0.14 143506