RADWAG MAX 60 Moisture Analyzer - Manual (Page 86)

- 86 -
adjustment coefficient by more than
20%
"Out of range " 3.1
Parameter value exceeds permissible
value.
"Incorrect value " 3.2 Impermissible parameter value
"Incorrect password " 3.4
"Overwriting error " 4.1
Errors relating to data transmission to a
computer or a printer connected to a
moisture analyzer.
" Parity error " 4.2
" Frame error " 4.3
"CTS transmission
suspended "
4.4
" XOFF transmission
suspended"
4.5
"Incorrect date " 5.1 Error of date setting.
"Time value exceeded " 6.1
Timeout error for carrying out a given
process (e.g. zeroing).
CAUTION:
If the carried out activities related to dealing troubleshooting or maintenance are
other than expected, please immediately contact you locla RADWAG dealer or
service point.
18. MEMORY OF CARRIED OUT MEASUREMENTS
A moisture analyzer MAX series enables storing Maximum 100 last carried out
measurements that comprise the following set of data: date, time,
measurement time, name, drying mode, drying temperature, drying time, start
mass, end mass, final result. The measurements are saved in a pile. After
saving over a 100 a measurement in a pile, the record with no. 101 is
overwritten on the record no. 99, and the whole list is moved upwards by one.
It causes deleting the measurement record in position 00. Means of entering
the memory of measurements:
When in main window press Display button on the moisture analyzer’s
overlay.
A window is opened containing list of stored measurement records.