Setting date, Setting displaying criteria for date and time, Setting moisture analyzer operating parameters – RADWAG MAX 60 Moisture Analyzer User Manual
Page 35: Entering menu group p4 readout

- 35 -
After setting the time to a needed value return to the weighing mode following
procedure described in point 7.1 of this user manual.
8.3.4.
Setting date
Press navigating arrow key to enter settings of parameter 04 Date
Following procedure described in point 8.3.3 set current date value. After
setting the date return to the weighing mode following procedure specified in
point 7.1 of this user manual.
8.3.5.
Setting displaying criteria for date and time
Moisture analyzer MAX series enables declaring whether date and time should
be visible in the upper bar of the display during instrument operation. The
displaying criteria are modifiable by setting an appropriate value of the
parameter.
The value is changed in accordance with specification given in point 7.1 of this
user manual. If the parameter value is set to 1 then date and time re visible in
the upper bargraph of the display.
8.4.
Setting moisture analyzer operating parameters
Moisture analyzer MAX series enables adjusting its operation to current
ambient conditions (filter) or user needs (display refreshment, autozero, last
digit). The parameters are grouped in menu
8.4.1.
Entering menu group P4 Readout
Enter menu group P4 Readout