Setting printout interval, Setting size of a sample to be tested – RADWAG MAX 60 Moisture Analyzer User Manual
Page 62
- 62 -
10.7.
Setting printout interval
This parameter determines the interval of sending a measurement result on
humidity content of a tested sample.
Procedure:
Go to software menu. Use DOWN
navigating arrow key to place the cursor
(black triangle) next to a parameter
Printout interval.
If option “Chart” is enabled, then the printed result is %M.
10.8.
Setting size of a sample to be tested
The parameter determines the need to use a sample of specific mass. The
user can select one of three available options: None, Obligatory, Optional.
Procedure:
Go to software menu. Use DOWN
navigating arrow key to place the cursor
(black triangle) next to a parameter
Sample.
Press RIGHT arrow navigating key to
enter the field for selecting one of
available options.
Use function keys on moisture analyzer
keyboard, or an external computer
keyboard. Set the sample mass value in
accordance with above specified means of
moving in the user menu.
After setting and saving data on a mass of
a sample to be tested, set another
parameters on a drying process, i.e. on
temperature and finish mode, as required
by enabled drying mode.