RADWAG MAX 60 Moisture Analyzer - Manual (Page 68)

- 68 -
11. TESTING PROCEDURE USING A DRYING PROGRAM FROM THE
LIBRARY OF DRYING PROGRAMS
A moisture analyzer MAX series enables carrying out a drying process using
programs saved in the library of drying programs. This means of using the
device considerably speeds up the preparation for a testing process, as all the
parameters on drying process of a material are already determined in the
program, i.e. the drying parameters are not set each time before starting a
testing procedure of a material.
The user is able to quickly select a drying program for a substance to be tested
from the library. The program contains all drying parameters for the sample to
be tested. On changing the drying program, the parameters for a drying
process also change.
CAUTION:
In order to enable the libraries of drying programs in the user menu, go to
menu group P7 Other, parameter P7 02 Library of drying programs and set it to
value “1” – i.e. enabled).
The means of enabling the parameter is described in details in point 8 of this
user manual.
Procedure:
Press Test Menu button.
The software displays list of
available drying programs.
Use UP and DOWN navigating
arrow keys to set the cursor (black
triangle) next to a drying program
intended for testing a sample.