beautypg.com

RADWAG MAX 60 Moisture Analyzer User Manual

Page 56

background image

- 56 -

The indications on the display
change and indicate data on
conducted process. The moisture
analyzer automatically carries out
the drying process with drying
parameters as set in the drying
criteria. The instrument
automatically conducts all needed
mass measurement and calculating
processes resulting from changes
mass of the tested sample.
At the begining of the drying
process the moisture analyzer
sends via the RS 232
communication port a header (in
accordance with pre-determined
printout options – see group of
parameters P6 Printouts).


During the drying process the data
visible on the display is updated and
indicate current measurement result
(i.e. test time, temperature in the drying
chamber, etc.).
Also, during the drying process the
moisture analyzer automatically sends
data, via the RS 232 communication
port, printed in the line (in accordance
with pre-determined printout options –
see group of parameters P6 Printouts)
in pre-set time intervals.

DISPLAY button on moisture analyzer’s
overlay enables switching between
types of measurement result.

After completing the drying process the
moisture analyzer displays a summary
from the testing procedure and locks
indication with final humidity content on
the display.
Additionally, the moisture analyzer
automatically sends data, via the RS
232 communication port, printed in the
footer (in accordance with pre-
determined printout options – see group
of parameters P6 Printouts).

This manual is related to the following products: