List of commands computer - balance – RADWAG MAX 60 Moisture Analyzer User Manual
Page 78

- 78 -
15.
LIST OF COMMANDS COMPUTER - BALANCE
Function
INTERFACE RESET
Command
R CR LF (zeroing currently carried out commands, restoring
factory default settings)
Function
SEND ALL IMPLEMENTED COMMANDS
Command
PC CR LF (sends information on all commands implemented in
the balance’s software)
Function
SEND MEASUREMENT RESULT IN BASIC MEASURING UNIT
Command
S CR LF (sends result in basic measuring unit on stabilization of
indication)
Function
IMMEDIATELY SEND MEASUREMENT RESULT IN BASIC
MEASURING UNIT
Command
SI CR LF (immediately sends result in basic measuring unit)
Function
SEND MEASUREMENT RESULT IN CURRENT MEASURING
UNIT
Command
SU CR LF (sends result in current measuring unit on stabilization
of indication)
Function
IMMEDIATELY SEND MEASUREMENT RESULT IN CURRENT
MEASURING UNIT
Command
SUI CR LF (immediately sends result in current measuring unit)
Function
ZERO BALANCE
Command
Z CR LF (zero balance on stabilization of indication)
Function
IMMEDIATELY ZERO BALANCE
Command
ZI CR LF (zero balance immediately on sending the command , if
possible at the moment)
Function
TARE WHEN STABLE
Command
T CR LF (tarring balance on stabilization of indication)
Function
IMMEDIATELY TARE BALANCE
Command
TI CR LF (tare balance immediately on sending the command , if
possible at the moment)
Function
GIVE FACTORY NUMBER
Command
NB CR LF (sends factory number of a balance)
Function
GIVE MEASURING RANGE
Command
FS CR LF (sends maximum measuring range (maximum capacity
of a balance in basic measuring unit)