RADWAG MAX 60 Moisture Analyzer - Manual (Page 15)

- 15 -
4.2. Unpacking
Carefully remove the moisture analyzer from its packaging, remove the plastic
and foil transport protective elements. Gently place the moisture analyzer in its
intended place of use.
Assembly the components of drying chamber, following guidelines from below
figure:
Assembling moisture analyzer components:
-
Assembly insert of the drying
chamber’s basis
- Assembly drying chamber cover,
- Assembly drying pan handle,
- Assembly drying pan bracket,
- Assembly the disposable drying
pan..
Setting drying pan’s supporter (bracket).
When assembling the pan supporter (bracket) pay
special attention to the correct positioning of its
mandrel. The mandrel features a cut for its unique
positioning against the pan handle, thus
preventing their contact and friction.
Setting pan’s bracket:
-
On assembling the pan bracket onto the
mandrel, turn the bracket slightly, so that the
cut on the mandrels are located in their
unique and correct position,
- When turning the mandrel use most gentle
movements not to damage moisture
analyzer’s measuring system.