Printouts, Standard printout template – RADWAG MAX 60 Moisture Analyzer User Manual
Page 38

- 38 -
8.6.
Printouts
User of a moisture analyzer MAX
series can set up to 5 different
printout templates which are sent
from the instrument to a connected
peripheral device (a printer or a
computer) through the RS 232 slot.
-
A single STANDARD
printout containing data
enabled in the GLP
procedures
-
Four NON-STANDARD
customized printout
templates
8.6.1.
Standard printout template
On pressing ENTER / PRINT key the moisture analyzer sends through the RS
232 interface current display status (mass of weighed load) and variables
declared in submenu P2 GLP.
Examples of standard printout templates in weighing mode:
A question mark preceding the mass value means that the mass readout was
unstable at the moment of printout release.
A printout can be divided into three sections:
•
Header (containing data on selected drying mode and start mass of a
sample to be dried)
•
Line (containing partial drying time and humidity content result)
•
Footer (containing end mass, total drying time and final drying result).
Date: 22/10/2001
Hour: 13.04.23
User: Wilk
Project: XW/456
62.690 g
Date: 22/10/2001
Hour: 13.16.49
User: Wilk
Project: XW/456
Balance: 10
? 62.685 g
62.690 g