RADWAG MAX 60 Moisture Analyzer - Manual (Page 42)

- 42 -
Principles of inserting texts:
a) Using keys on balance’s overlay
Toggling upwards through all available characters: digits, letters, and
signs by one value.
Toggling downwards through all available characters: digits, letters, and
signs by one value.
Selecting a character for modification by moving the cursor to the RIGHT
(the following pressing of the the right arrow key causes activating a
character for modification (character is flickering; if no character is
inserted, then repeated pressing of this key causes adding a space in the
text)
Selecting a character for modification by moving the cursor to the LEFT
(another pressing of the left arrow key causes a erasing a flickering
character, and causes flieckering of a character located on the left from
the erased one.)
Accept an inserted character
b) Using computer keyboard PS/2 type
Press F2 key to enter main menu of a balance. Press F3 or use navigating
arrows to place the cursor next to a group of parameters P6 Printouts and by
pressing F2 key enter the submenu group. Then, using the navigating arrows place
the cursor next to a desired parameter and press F2 key to activate text inserting
procedure. Use keyboard text keys to insert a text into the strings (max 8
characters per one text string) and accept it by pressing Enter key. Repeat the
process for the other text strings.
8.6.4. Printout selection
Enter menu group P6 Printouts. Select one of available values for the parameter
P6 01 Printout no.:
0 : standard
1 : printout 1
2 : printout 2
3 : printout 3
4 : printout 4
On selecting an appropriate value accept it by pressing ENTER key.