RADWAG WLY Scales - Manual (Page 99)

99
25.2. Local setting of a working mode
Local setting of a working mode <
Weighing>
are accessible on pressing
a hot key < Local parameters>:
Save Mode Detailed description in ch. 24.2 of the user manual
Down-weighing Detailed description in ch. 24.3 of the user manual
Checkweighing Detailed description in ch. 24.4 of the user manual
Tare mode Detailed description in ch. 24.5 of the user manual
Labelling mode Detailed description in ch. 24.6 of the user manual
Statistics Detailed description in ch. 24.7 of the user manual
Peak hold Detailed description in ch. 24.8 of the user manual
26. WORKING MODES – PARTS COUNTING
Parts counting is working mode allowing to count pieces on the basis of the
standard unit mass of a single piece set on the scale or fetched from the
database.
Notice:
If parts counting is performed in an additional container it should be tarred.
26.1. Starting the working mode
Procedure:
• While in the main window press in the top bar, then you will
see a submenu comprising a list of modes,
• Choose <
Parts counting >
, program automatically returns
to the main window displaying icon in the top bar,
• The weight unit is automatically changed to „pcs” and two screen
buttons on the right side appear: