Attributing a label to a client, Printing labels, Appendix d - citizen printer setting – RADWAG WLY Scales User Manual
Page 220: Appendix d, Citizen printer setting
220
42.5. Attributing a label to a client
Procedure:
•
Enter <
Databases>
according to ch. 33 of this manual,
•
Enter <
Clients>
and press the required item,
•
Enter <
Label>
, then the database of labels is open with the list
of all labels,
•
Choose the required label. The program automatically ascribes the
label to the client.
42.6. Printing labels
Procedure:
•
While in the main window choose a product (button
)
or a client (button
) that has attributed a label,
•
Place a load on the pan and wait for
then press
,
•
The label is printed on a printer connected to the scale.
Notice:
1. Labels can be attributed to products or/and clients. After pressing
a label is printed on a connected printer, provided
a selected client or product has an ascribed label.
2. Users can perform the test label printout – see ch. 33.5 of this
manual.
43. APPENDIX D -
CITIZEN printer setting
Baud rate : 9600b/sec
Parity control : No
Number of data bits : 8bit
Number of stop bits : 1 bit
Flow control : No
IEEE 1284 : ON