RADWAG WLY Scales - Manual (Page 43)

43
Procedure:
• Enter <
Weighing>
according to ch. 14 of the manual, select
< Autozero>
and then set an appropriate value.
Accessible settings:
- Autozero off
- Autozero on
14.4. Minimum weight for different functions (LO)
Parameter is associated with automatic weighing.
Next weighing will not be saved until the indication goes under the
THRESHOLD LO
(net).
Procedure:
• After entering <
Threshold Lo>
according to ch. 14 of this manual
a keyboard is displayed,
• Inscribe LO and confirm by pressing .
14.5. Last digit
The last digit option <
Last digit>
is to switch off the last digit of
measured mass indication – the measurement is carried out with decreased
accuracy.
Procedure:
• Enter group of parameters <
Weighing>
in accordance with ch.
14 of this user manual, select parameter <
Last digit>
and set
its desired value.