RADWAG WLY Scales - Manual (Page 96)

96
• Enter the required working mode and choose: „
Labelling mode /
CC label automatic triggering / Mode”
and then set the
required option:
None
- Cumulative label of cumulative labels printout is initiated
by pressing or
*
,
Mass
- Cumulative label of cumulative labels printout is initiated by
exceeding the value set in parameter <
Threshold>
.
The value is treated as the total from single weighings,
Number
- Cumulative label of cumulative labels printout is initiated by
exceeding the value set in parameter <
Threshold>
.
The value is treated as the number of single weighings,
*)
Manual printing of cumulative labels can be done in two ways depending
on the button used:
Printing followed by zeroing label counter or the total mass
Printing without zeroing label counter or the total mass
By default setting button is accessible in the bottom part of the
display but activating the button can be done in submenu:
„ / Display / Actions”
(see ch. 17.2).
For automatic printout cumulative labels of cumulative (CC)
labels counters and total mass variables are always zeroed.
• Confirm the changes by pressing and go to parameter
< Threshold>
then window appears with
the screen keyboard,
• Set the appropriate value for automatic triggering CC labels:
−
If parameter <
Mode>
is set to then enter the required
value of total mass to exceed in order to print the CC label,