RADWAG WLY Scales - Manual (Page 92)

92
Procedure:
• Enter parameters group <
Working Modes>
according to ch. 24
of this manual,
• Enter the required working mode and choose <
Tare mode>
and then set the required option.
Options:
Single
- Basic tare mode. The set (chooden) tare value is
overwritten after entering a new value
Current sum
- Summing up tare values of product and package together
with manually inscribed tare. After next setting of product
or package tare the entered tare value is disabled
Total sum
- Summing up all subsequently entered tare values
Autotare
- Automatic tare mode together with mode
Each
measurement
- Automatic tarring for each accepted measurement result.
24.6. Labelling mode
Labelling mode can be initiated together with every working mode. The
labelling system is intended to print labels for marking weighed goods e.g. a
packing process. The program can print standard labels for single products,
cumulative labels for sticking to bulk containers and cumulative labels for
cumulative labels for sticking to the large transport containers holding bulk
containers.
In submenu <
Labelling mode>
there are accessible following special
functions:
Number of labels
No. of cumulative labels
No. of CC labels
C label automatic triggering
CC label automatic triggering