RADWAG WLY Scales - Manual (Page 94)

94
Procedure:
• Enter parameters group <
Working Modes>
according to ch. 24
of this manual,
• Enter the required working mode and choose: „
Labelling mode /
No. of CC labels”
, then the editing field
with the screen keyboard is opened,
• Enter the required number od cumularive labels and confirm
by pressing .
24.6.4. Automatic triggering of cumulative labels
Users have access to the function of automatic triggering of printing
cumulative labels after setting parameters <
Mode>
and
< Threshold>
.
Procedure:
• Enter <
Working modes>
parameter group as described
in chapter 24 of the manual,
• Enter the required working mode and choose: „
Labelling mode /
C label automatic triggering / Mode”
and then set the
required option:
None
- Cumulative label printout is initiated by pressing
or
*
,
Mass
- Cumulative label printout is initiated by exceeding the
value set in parameter <
Threshold>
. The value
is treated as the total from single weighings,
Number
- Cumulative label printout is initiated by exceeding the
value set in parameter <
Threshold>
. The value
is treated as the number of single weighings.
*)
Manual printing of cumulative labels can be done in two ways
depending on the button used: