Switch off continuous transmission in current unit, Set lower threshold, Set upper threshold – RADWAG WLY Scales User Manual
Page 190: Read lower threshold, Syntax: cu0 cr lf, Possible answers, Syntax: odh cr lf
190
34.4.13. Switch off continuous transmission in current unit
Syntax: CU0 CR LF
Possible answers:
CU0_I CR LF
- command comprehended but cannot be executed
CU0_A CR LF
- command comprehended and executed
34.4.14. Set lower threshold
Syntax: DH_XXXXX CR LF, where: XXXXX – mass format
Possible answers:
DH_OK CR LF
- command executed
ES CR LF
- command not comprehended (wrong mass format)
34.4.15. Set upper threshold
Syntax: UH_XXXXX CR LF, where: XXXXX – mass format
Possible answers:
UH_OK CR LF
- command executed
ES CR LF
- command not comprehended (wrong mass format)
34.4.16. Read lower threshold
Syntax: ODH CR LF
Possible answers: DH_MASA CR LF - command executed
Frame format:
1
2
3
4-12
13
14
15
16
17
18
19
D
H
space
mass
space
unit
space
CR
LF
Mass
- 9 characters justified to the right
Unit
- 3 characters justified to the left