RADWAG WLY Scales - Manual (Page 146)

146
- Characteristics of negative errors T in a sample
(in accordance with ch. 30.6 of the manual)
- Characteristics of negative errors 2T in a sample
(in accordance with ch. 30.6 of the manual)
- Characteristics of positive errors T in a sample:
+15g
- value of the positive error T,
Max T
- permissible number of the positive errors T,
n T
- acutal number of the positive errors T
- Characteristics of positive errors 2T in a sample:
+30g
- value of the positive error 2T,
Max 2T
- permissible number of the positive errors 2T,
n 2T
- acutal number of the positive errors 2T
Put Full 1/30
- Command on control process
Net
- Net mass of the controlled product
- Data on a control process in progress (in accordance
with ch. 30.6 of the manual)
- Change of the workspace: numerical data / chart
(in accordance with ch. 30.6 of the manual)
- Control compeltion
After the test has been comleted the test is summarised (see ch. 30.8)
and the results are automatically saved in the database.
Notice:
A pattern and example of the report from estimating average tare are
described in ch. 30.14 of this manual.
30.12. Simultaneous carrying out two control processes
The scale enables carrying out two control processes at the same time.
The option is enabled in:
• Go to local mode settings and set parameter <
Number of
accessible controls>
to value 2 (dtwo controls),
• Change functions of the hot-keys for the following screens: home
screen, settings and process screens. Enable hot-keys:
< Set control 1>
and <
Set control 2>
for the above screens.