RADWAG WLY Scales - Manual (Page 97)

97
−
If parameter <
Mode>
is set to use the screen
keyboard to enter the required counter value as a threshold to
trigger off printing CC labels.
• Confirm the changes introduced by pressing .
24.7. Statistics
All statistics are continuously updated after each measurement is saved
in the scale memory. Statistics can be calculated globally (does not depend
on the selected product) or separately for every product from the product
database. It can be set in parameters <
Statistics>
.
Procedure:
• Enter <
Working modes>
parameter group as described
in chapter 24 of the manual,
• Enter the required working mode and choose <
Statistics>
and then set the required option.
Options:
Global
- global statistics,
Product
- statistics for every product.
Notice:
In case of operation with < Statistics> set to bare in mind
that after restarting only statisics of the last weighed product are recovered.
24.8. Peak hold
The scale enables measuring the maximum force influencing the weighing
pan.
Procedure:
• Enter <
Working modes>
parameter group as described
in chapter 24 of the manual,