RADWAG WLY Scales - Manual (Page 48)

48
Procedure:
• Enter <
Devices>
parameter group as described in chapter
16 of the manual,
• Choose „
Computer
/
Weighing Printout Template”
then
the editing field with the screen
keyboard appears,
• Modify the template if necessary and confirm the changes by pressing
.
Notice:
There are additional buttons in the bottom line of the screen keyboard.
They can be used while modifying a printout template.:
Screen keyboard on/off
Reading a printout template from a *.lb file (button active while
connecting a USB pendrive)
Saving printout template in a file format *.lb (option enabled
on plugging a portable data storage device to scale port)
List of variables for printout templates (see the list in APPENDIX A
of this manual)
Clear the editing field
16.1.5. Cooperation with “E2R System”
Scales can cooperate with computer software „E2R System” that is
a modular system for complex production supervising by monitoring
of weighings processes. In order to allow the cooperation with
„E2R System”
enable parameter <
E2R System>
.
Notice:
The parameter < E2R System> can be activated by an authorized
service or the manufacturer.