Devices, Computer, Computer port – RADWAG WLY Scales User Manual
Page 46
46
Procedure:
•
Enter <
Communication>
parameter group as described
in chapter 16 of the manual,
•
Select: „
Tcp /
Port”
then you will see window
with the screen keyboard,
•
Enter the required number and press
.
Notice:
The number of TCP port in RADWAG instruments is set to default value:
4001.
16. DEVICES
16.1. Computer
The scale can cooperate with a computer. Active connection scale-computer
is signalled by icon
in the top bar of the main window. In submenu
<
Computer>
some settings needs to be configured for cooperation
with computers.
Enter submenu <
Computer>
,
press
and then
:
„
Devices /
Computer”
.
16.1.1. Computer port
Procedure:
•
Enter parameters’ group <
Devices>
according to ch.
16 of this manual,
•
Select „
Computer
/
Port”
and then set the appropriate option.
The scale can communicate with a computer via following ports:
•
RS232 (1),
•
RS232 (2),
•
Tcp.