RADWAG WLY Scales - Manual (Page 57)

57
The scale can communicate with the reader via following ports:
• RS232 (1),
• RS232 (2).
16.4.2. Procedure of attributing the card number to an operator
To use a transponder card to log on an operator the card needs to be
ascribed to the operator in the database of operators.
Procedure:
• Connect the transponder card reader to the required communication
port (RS 232 (1) or RS 232 (2)),
• Choose a communication port for the reader (see ch. 16.4.1 in this
manual),
• In submenu <
Communication>
set the baud rate to the same
as in the reader (default 9600b/s),
• Enter the database of operators and edit the selected operator going
to the field <
Card Number>
,
• After entering the field <
Card Number>
you will see the editing
field with the screen keyboard,
• Having approached the card to the reader the program automatically
displays in editing field the number of read card,
• Confirm the number by pressing and return to weighing.
16.5. Additional display
16.5.1. Additional display port
Procedure:
• Enter parameters group <
Devices>
according to ch. 16
of this manual, select „
Additional display
/
Port”
and then choose an appropriate option from the list.