Setting of the number of labels to print, Setting of the number of cc labels to print – RADWAG WLY Scales User Manual
Page 93
93
24.6.1. Setting of the number of labels to print
In the parameter <
Number of labels>
user defines the amount
of labels. They are printed on the printer connected to the weight.
Procedure:
•
Enter parameters group <
Working Modes>
according
to ch. 24 of this manual,
•
Enter the required working mode and choose: „
Labelling mode /
Number of labels”
then the editing field
with the screen keyboard is opened,
•
Choose the required number of labels and confirm by pressing
.
24.6.2. Setting of the number of cumulative labels to print
In the parameter <
No. of cumulative labels>
define the amount
of sum labels. They are printed on connected printer.
Procedure:
•
Enter parameters group <
Working Modes>
according to ch. 24
of this manual,
•
Enter the required working mode and choose: „
Labelling mode /
No. of cumulative labels”
, then the editing field
with the screen keyboard is opened,
•
Enter the required number od cumularive labels and confirm by
pressing
.
24.6.3. Setting of the number of CC labels to print
In the parameter <
No. of CC labels>
define the amount of total sum
labels to print. They are printed on connected printer.